Evolution of technology in dental prostheses
DOI:
https://doi.org/10.35381/s.v.v8i2.4139Keywords:
Dental prosthesis, biomedical technology, three-dimensional printing, (Source: DeCS)Abstract
Objective: To analyze the evolution of technology in dental prostheses. Method: Descriptive documentary. Conclusion: Technological evolution in dental prostheses has allowed significant advances in precision, durability and customization, transforming the way these devices are manufactured and used. The integration of methods such as CAD-CAM, the incorporation of nanomaterials, and the adoption of 3D printing techniques have improved the functionality and biocompatibility of prostheses, while optimizing the quality of life of patients.
Downloads
References
May LW, John J, Seong LG, et al. Comparison of cooling methods on denture base adaptation of rapid heat-cured acrylic using a three-dimensional superimposition technique. J Indian Prosthodont Soc. 2021;21(2):198-203. http://dx.doi.org/10.4103/jips.jips_41_21
Algabri R, Alqutaibi AY, Altayyar S, et al. Behaviors, hygiene habits, and sources of care among removable complete and partial dentures wearers: A multicenter cross-sectional study. Clin Exp Dent Res. 2024;10(2):e867. http://dx.doi.org/10.1002/cre2.867
Perea-Lowery L, Minja IK, Lassila L, Ramakrishnaiah R, Vallittu PK. Assessment of CAD-CAM polymers for digitally fabricated complete dentures. J Prosthet Dent. 2021;125(1):175-181. http://dx.doi.org/10.1016/j.prosdent.2019.12.008
Furuya Y, Kimoto S, Furuse N, et al. Effectiveness of silicone-based resilient denture liners on the patient-reported chewing ability: A randomized controlled trial. J Prosthodont Res. 2022;66(4):546-550. http://dx.doi.org/10.2186/jpr.JPR_D_21_00159
Joseph AM, Joseph S, Mathew N, Koshy AT, Jayalakshmi NL, Mathew V. Effect of Incorporation of Nanoclay on the Properties of Heat Cure Denture Base Material: An In vitro Study. Contemp Clin Dent. 2019;10(4):658-663. http://dx.doi.org/10.4103/ccd.ccd_737_17
Srinivasan M, Chien EC, Kalberer N, et al. Analysis of the residual monomer content in milled and 3D-printed removable CAD-CAM complete dentures: an in vitro study. J Dent. 2022;120:104094. http://dx.doi.org/10.1016/j.jdent.2022.104094
Lim TW, Burrow MF, McGrath C. Efficacy of ultrasonic home-care denture cleaning versus conventional denture cleaning: A randomised crossover clinical trial. J Dent. http://dx.doi.org/10.1016/j.jdent.2024.105215
Friel T, Waia S. Removable Partial Dentures for Older Adults. Prim Dent J. 2020;9(3):34-39. http://dx.doi.org/10.1177/2050168420943435
Nakai N, Kurogi T, Murata H. Oral health-related quality of life of conventional removable partial dentures, unilateral nonmetal clasp dentures, and shortened dental arch with 2- or 3-tooth unilateral distal extension tooth loss in the mandible: A randomized, crossover, clinical trial. J Prosthet Dent. 2024;131(2):220-226. http://dx.doi.org/10.1016/j.prosdent.2021.07.014
Fueki K, Yoshida-Kohno E, Wakabayashi N. Oral health-related quality of life in patients with non-metal clasp dentures: a randomised cross-over trial. J Oral Rehabil. 2017;44(5):405-413. http://dx.doi.org/10.1111/joor.12494
Kaufmann R, Friedli M, Hug S, Mericske-Stern R. Removable dentures with implant support in strategic positions followed for up to 8 years. Int J Prosthodont. 2009;22(3):233-242.
Loch C, Brunton PA, Rahim ZA, et al. The teaching of removable partial dentures in dental schools in Oceania. J Dent. 2020;95:103309. http://dx.doi.org/10.1016/j.jdent.2020.103309
Abualsaud R, Gad MM. Highlights on Drug and Ion Release and Recharge Capacity of Antimicrobial Removable Prostheses. Eur J Dent. 2023;17(4):1000-1011. http://dx.doi.org/10.1055/s-0042-1758788
Ibiyemi O, Lawal FB. A short report on tooth replacement in an older suburban population in Nigeria. Gerodontology. 2017;34(4):508-511. http://dx.doi.org/10.1111/ger.12303
Lin WS, Alfaifi AA, Gregory RL. Response to Letter to the Editor regarding the article Impact of caffeine on metabolic activity and biofilm formation of Candida albicans on acrylic denture resin in the presence of nicotine. J Prosthet Dent. 2022;127(2):373-374. http://dx.doi.org/10.1016/j.prosdent.2021.08.017
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 José Arturo Molina-Ramón, Danilo Alexander Jerez-Muzo, Mateo German Medina-Salinas, German Alexander Tubon-Yancha
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
CC BY-NC-SA : Esta licencia permite a los reutilizadores distribuir, remezclar, adaptar y construir sobre el material en cualquier medio o formato solo con fines no comerciales, y solo siempre y cuando se dé la atribución al creador. Si remezcla, adapta o construye sobre el material, debe licenciar el material modificado bajo términos idénticos.
OAI-PMH: https://fundacionkoinonia.com.ve/ojs/index.php/saludyvida/oai.
